Skip to content

THE COURSE / M1 THE SWITCH / M1.3

The p–n junction

After this lesson you can:

  • Explain how the depletion region and the built-in voltage form where p meets n.
  • Say why a junction passes current one way and blocks it the other.
  • Read a diode's curve: 60 mV a decade, turning on near 0.6 V.

Loading the lesson…

Sources

  1. C. C. Hu, Modern Semiconductor Devices for Integrated Circuits (Pearson, 2010), chapter 4, "PN and Metal–Semiconductor Junctions" (free from the author). Where P meets N, a depletion layer with few electrons or holes; the built-in potential φbi = (kT/q) ln(NdNa/ni²), typically about 0.9 V in silicon; the N side sits at the higher potential. Wdep = √(2εsφbi/qN), set by the lighter doping: with Na = 10²⁰ and Nd = 10¹⁷, φbi ≈ 1 V, Wdep ≈ 0.12 µm, nearly all on the N side (1.2 Å on the P side); Wdep ≈ 0.1 µm for 10¹⁷. Reverse bias raises the barrier by Vr and widens the depletion layer; little current, as there are few minority carriers to carry it; it saturates at −I0. I = I0(e^(qV/kT) − 1): a straight line on a semi-log plot, 60 mV per decade at room temperature; silicon diodes turn on at about 0.6 V, lower when hot. Breakdown at a critical reverse bias, not destructive if the current is limited (the Zener diode).
  2. C. C. Hu, Modern Semiconductor Devices for Integrated Circuits (Pearson, 2010), chapter 5, "MOS Capacitor" (free from the author). A gate, an insulator such as SiO₂ as thin as 1.5 nm, and the silicon body; aluminium gates before 1970, then heavily doped polysilicon, and from 2008 metal gates and high-k dielectrics again in the most advanced transistors. On a P body: a negative gate gathers holes (accumulation); a positive gate pushes them away, leaving acceptor ions (depletion); more positive, electrons gather at the surface, inverting it to N type (inversion). Threshold: the surface electron density equals the body doping, at a band bending of 2φB = 2(kT/q) ln(Na/ni). Beyond threshold, Qinv = Cox(Vg − Vt), Cox = εox/Tox; the depletion width stops growing. A lone capacitor takes minutes to make its inversion electrons; in a transistor the N+ junctions supply them. A MOS transistor is a MOS capacitor flanked by two PN junctions.