THE COURSE / M10 MEMORY / M10.1
One transistor, one capacitor
After this lesson you can:
- Draw a DRAM cell, and say what its word line and bit line do.
- Explain how a row is read, and why reading it means writing it back.
- Say why every cell must be refreshed, how often, and what sets the interval.
Loading the lesson…
Sources
- J. Liu, B. Jaiyen, R. Veras and O. Mutlu, "RAIDR: Retention-Aware Intelligent DRAM Refresh," ISCA 2012. A DRAM cell is a capacitor and an access transistor, connected to a bitline and controlled by a wordline; cells sharing a wordline form a row; each bank has a row of sense amplifiers, one per bitline; opening a row from bitlines precharged to VDD/2 shares each cell's charge with its bitline, and the sense amplifier drives the bitline fully to VDD or 0 V, recharging the cells; a row is refreshed by opening it; the refresh interval has stayed 64 ms for several generations; tREFI 7.8 µs below 85 °C, 3.9 µs from 85 to 95 °C; retention log-normal, set by the leakiest cell: in 32 GB, over 10¹¹ cells, about 30 can't wait twice as long and about 1,000 four times as long.