Skip to content

THE COURSE / M10 MEMORY / M10.3

The capacitor

After this lesson you can:

  • Say why the cell needs enough capacitance, and the three ways to get it.
  • Follow the capacitor's steps: the mould, the hole, the electrodes, the drying and the high-k.
  • Explain what limits it: the etch, the drying, the leakage and the pitch.

Loading the lesson…

Sources

  1. Micron Technology, "Capacitors with electrodes having a portion of material removed, and related semiconductor devices, systems, and methods," US 12,193,208 B2 (priority 20 January 2021, granted 7 January 2025). Aspect ratio: a DRAM capacitor's height to its width; embodiments greater than about 50:1, and about 100:1; lattice materials give the capacitors structural support, preventing or reducing toppling, collapse and wobbling; rising aspect ratios increase container under-etch and the risk of containers shorting.
  2. Micron Technology, "Semiconductor processing applying supercritical drying," US 11,127,588 B2 (filed 12 April 2019, granted 21 September 2021). A liquid's surface tension and capillary action can wobble, bend or twist a high-aspect-ratio capacitor column as it dries; at the critical point the liquid's and gas's densities become equal and the force is gone; supercritical CO2, at roughly 20–100 °C and 5–60 MPa.
  3. S. Knebel, M. Pešić, K. Cho, J. Chang, H. Lim, N. Kolomiiets, V. V. Afanas'ev, U. Schroeder and T. Mikolajick, "Ultra-thin ZrO2/SrO/ZrO2 insulating stacks for future dynamic random access memory capacitor applications" (author manuscript, KU Leuven Lirias). Downscaling brought high-k materials in a three-dimensional cylindrical capacitor with metal electrodes; the most common DRAM capacitor is a symmetrical ZrO2/Al2O3/ZrO2 (ZAZ) stack between TiN electrodes; thin ZrO2 crystallises tetragonal with k around 40 but leaks; a thin amorphous Al2O3 interlayer keeps leakage below the common DRAM criterion of 100 nA/cm² but lowers the effective k; ALD is favoured for conformal films in high-aspect-ratio capacitors.
  4. Lam Research, "Lam Research Advances Next-Gen 3D Memory Manufacturing With New Etch Technology," as published by StorageNewsletter, 5 February 2021. Vantex, Lam's newest dielectric etch, on the Sense.i platform; etch aspect ratios in 3D NAND and DRAM driven to new levels; a chamber built for higher RF power than before, with RF pulsing for tight CD control; high aspect ratio features at high throughput; hundreds of sensors on the platform.
  5. J. Liu, B. Jaiyen, R. Veras and O. Mutlu, "RAIDR: Retention-Aware Intelligent DRAM Refresh," ISCA 2012. A DRAM cell is a capacitor and an access transistor, connected to a bitline and controlled by a wordline; cells sharing a wordline form a row; each bank has a row of sense amplifiers, one per bitline; opening a row from bitlines precharged to VDD/2 shares each cell's charge with its bitline, and the sense amplifier drives the bitline fully to VDD or 0 V, recharging the cells; a row is refreshed by opening it; the refresh interval has stayed 64 ms for several generations; tREFI 7.8 µs below 85 °C, 3.9 µs from 85 to 95 °C; retention log-normal, set by the leakiest cell: in 32 GB, over 10¹¹ cells, about 30 can't wait twice as long and about 1,000 four times as long.