THE COURSE / M10 MEMORY / M10.5
Through-silicon vias, thinning and reveal
After this lesson you can:
- Say why DRAM dies are stacked: a wide, short path to the processor.
- Follow a through-silicon via from its etch to its copper fill.
- Explain why each die is ground thin, and how the vias are revealed and the die released.
Loading the lesson…
Sources
- K. Tran (SK hynix), "The Era of High Bandwidth Memory," Hot Chips 28 tutorial, August 2016. TSVs through each DRAM die over a base die with the PHY, the TSV area, the DFT test logic and direct-access balls; 1,024 data I/Os from the base die to the host through the interposer, up to 256 GB/s a stack (HBM2, 2 Gb/s a pin); micro-bumps 25 µm across at 55 µm pitch; a molded known-good stacked die, 0.72 mm tall (Gen2); the test flow: wafer test, wafer burn-in, stacking, a logic test through IEEE 1500, hot and cold tests and repair, speed test; after assembly, repair of cells and of TSVs and micro-bumps by lane remapping through IEEE 1500; thermal dummy bumps for heat.
- JEDEC, "JEDEC and Industry Leaders Collaborate to Release JESD270-4 HBM4 Standard," 16 April 2025 (as reprinted by StorageNewsletter, 17 April 2025). HBM4: transfer speeds up to 8 Gb/s across a 2048-bit interface, total bandwidth up to 2 TB/s a stack; 32 channels a stack, up from HBM3's 16, each with two pseudo-channels; 4-, 8-, 12- and 16-high stacks of 24 Gb or 32 Gb dies, to 64 GB; backwards compatible with HBM3 controllers.
- K. Gibb, "Hats Off to Hynix: Inside 1st High Bandwidth Memory," EE Times, 27 July 2015. The first HBM: four DRAM dies on a base logic die; vias about 50 µm into the silicon; a via-middle process, the TSVs formed after the tungsten contacts, by a Bosch etch, with an oxide liner; the top die more than twice as thick as the three below.
- Lam Research, Syndion product family (product page, read 1 November 2026). Deep silicon etch for through-silicon vias and trenches; one approach switches quickly between etch and deposition steps, carving the feature and coating its walls; the scallops that leaves trade against etch rate; its rapidly alternating process (RAP); key applications: TSV for high bandwidth memory and advanced packaging, and wafer backside processing.
- Lam Research, SABRE 3D (product page, read 1 November 2026). Electroplating for wafer-level packaging and filling TSVs, at the scale of microns rather than the angstroms of BEOL damascene, so long deposition times and multi-step processing; key applications TSV, copper pillar, RDL and Cu/SnAg and Ni/Au microbumps.
- EV Group, "Temporary Bonding and Debonding" (brochure, read 1 November 2026). Temporary bonding gives mechanical support to thin or to-be-thinned wafers, for 3D ICs among others: the device wafer bonded to a carrier, thinned and processed on its back, then debonded onto a film frame; the 850 DB debonds thinned, bowed and warped wafers and cleans them; IR laser release lifts off the carrier, which has to be silicon.
- DISCO, DGP8761 (product page, read 25 October 2026). A fully automatic grinder/polisher for 300 mm wafers: three axes and four chuck tables, rough grinding, fine grinding, then dry polishing (or CMP, or ultra-fine grinding) for stress relief; stable thin grinding below 25 µm; the successor to the DGP8760.
- DISCO, "What kind of company is DISCO?" (read 25 October 2026). Precision cutting, grinding and polishing equipment and diamond tools; thinning to the 5 µm level, holding a 30 cm wafer's thickness variation within 1.5 µm; named DISCO from 1969, for exports, and DISCO CORPORATION from 1977, having begun as Dai-Ichi Seitosho, a maker of blades and grinding wheels.
- SK hynix, "SK hynix Begins Volume Production of the World's First 12-Layer HBM3E," 26 September 2024. 36 GB in 12 layers; each DRAM chip made 40% thinner, so the stack keeps the eight-layer product's thickness; 9.6 Gbps; TSVs link upper and lower chips through thousands of fine holes; Advanced MR-MUF injects liquid protective material between the chips, controls warpage, reduces the pressure on the stacked chips, and dissipates 10% more heat than the previous generation.
- P. Garrou, "IFTLE 157 ECTC part 3: SPIL Backside Reveal, Sematech & IMEC Protrusion," Insights From Leading Edge, Solid State Technology, August 2013. Siliconware's ECTC 2013 paper: wafers temporarily bonded to carriers; the TSVs revealed by back grinding and plasma etch, passivated with PECVD nitride, and polished to open the copper; the reveal must keep thickness variation low for stacking, and its temperatures below the carrier adhesive's; controlling the exposed copper's height is a major challenge. SEMATECH's TSVs about 50 µm tall, aspect ratio about 10:1.
- Hamamatsu Photonics, "Stealth dicing technology" (read 1 November 2026). A laser focused inside the wafer forms SD layers, with cracks running towards the top and bottom surfaces, joined along the cut line by scanning; then the tape is uniformly tensed, extending the cracks and separating the wafer: a completely dry process, with fundamentally no kerf loss and no stress on the device.