THE COURSE / M11 PACKAGE AND TEST / M11.1
From wafer to die: thin and cut
After this lesson you can:
- Say what the sort map is and why only known-good dies are packaged.
- Follow a wafer through grinding, mounting and dicing.
- Choose between a blade, a laser groove and stealth dicing for a given wafer.
Loading the lesson…
Sources
- Wikipedia, "Wafer testing" (read 3 November 2026). A prober brings a probe card's needles into contact with each die; when all the test patterns pass, the die's position is remembered for packaging; failing dies were once marked with an ink dot, now held in a file, the wafermap; wafer functional test is also called die sort.
- DISCO, DGP8761 (product page, read 25 October 2026). A fully automatic grinder/polisher for 300 mm wafers: three axes and four chuck tables, rough grinding, fine grinding, then dry polishing (or CMP, or ultra-fine grinding) for stress relief; stable thin grinding below 25 µm; the successor to the DGP8760.
- DISCO, DFM2800 wafer mounter (catalogue sheet, read 3 November 2026). A wafer mounter in line with the DGP8761 grinder, for 300 mm ultra-thin wafers: it mounts the thinned wafer onto dicing tape in its frame and peels off the front's protective tape; for wafers under 25 µm, handling steps cut to about 20% of the previous model's; frame mount accurate to ±0.5 mm.
- DISCO, "Low-k grooving" (solutions library, read 3 November 2026). Low-k film is mechanically weak and risks peeling under normal blade dicing; the DFL7161 cuts two laser grooves in the street (Pi or Omega grooving), then the wafer is blade-diced at standard speed, with little or no chipping or delamination; a short-pulse UV laser vaporises the low-k, the vapour carrying the energy away with little heat damage.
- DISCO, DFD6362 Fully Automatic Dicing Saw (catalogue sheet, read 3 November 2026). A dicing saw for improved productivity with 300 mm wafers: facing dual spindles, 1.2 or 1.8 kW at 6,000 to 60,000 min⁻¹ (20,000 to 80,000 with high-speed rotation) or 2.2 kW at 3,000 to 30,000; X-axis cutting speed 0.1 to 1,000 mm/s; about 7% more throughput than the previous model; an optional automatic blade changer reading a 2D barcode on each blade; 1,200 x 1,550 x 1,800 mm, about 2,050 kg.
- DISCO, "Dicing thin wafers" (solutions library, read 3 November 2026). Thin dies, 50 µm or less: backside chipping grows as the workpiece thins; an extremely fine-grit blade (a #4800 against the standard #2000) shocks it less; a step cut often solves clogging; grit, feed speed and spindle speed are closely interrelated.
- Hamamatsu Photonics, "Stealth dicing technology" (read 1 November 2026). A laser focused inside the wafer forms SD layers, with cracks running towards the top and bottom surfaces, joined along the cut line by scanning; then the tape is uniformly tensed, extending the cracks and separating the wafer: a completely dry process, with fundamentally no kerf loss and no stress on the device.
- DISCO, "DFL7362: Stealth Dicing Laser Saw which Achieves Higher Throughput" (press release, 6 December 2017). Thin silicon cut into high-quality thin dies; 30% more throughput than the previous model from shorter transfer and alignment times; the SD engine Hamamatsu Photonics developed specifically for DISCO; sales from December 2018.
- DISCO, "DBG / SDBG process" (solutions library, read 3 November 2026). Dicing before grinding reverses the usual order: the wafer is half-cut first, and the dies separate when it is thinned below the cut; an in-line mounter peels off the grinding tape. SDBG, stealth dicing before grinding, for the thinner flash memory and controller dies of phones and tablets.
- US 7,345,254 B2, "Die sorting apparatus and method" (2008). The die on adhesive tape held by vacuum on the ejector platform; ejector pins lift the die and tape to start it peeling; a pick-up device holds it by suction; each die assigned a grade, the next die's position calculated from the wafer map, so only the dice needed are taken.