THE COURSE / M11 PACKAGE AND TEST / M11.2
Die attach and wire bond
After this lesson you can:
- Say what a package does for a die, and the difference between a leadframe and a substrate.
- Follow a die from attach and cure through plasma clean to a ball bond and a stitch on every pad.
- Explain transfer moulding, and why the wires can be swept and the mould left with voids.
Loading the lesson…
Sources
- Besi, Esec 2100 hS (product page, read 3 November 2026). The third generation of a 300 mm high-speed die bonder platform for epoxy die attach: QFN, TSOP, QFP, BGA, CSP-BGA, SiP-BGA, FBGA, LGA; 120 ms cycle with liquid cooling; 20 µm at 3σ (15 µm option); dies from 0.25 to 20 mm; leadframes 90 to 300 mm long.
- Nordson MARCH, "FlexTRAK-SHS automated plasma treatment system" (Circuits Assembly, 28 March 2019). High-throughput plasma treatment of leadframes and substrates in a 9.6 L chamber: surface cleaning, oxidation removal, organic contamination removal and surface activation; pre-wire-bond, pre-mould and pre-underfill treatment, and improved adhesion.
- Wikipedia, "Wire bonding" (read 3 November 2026). Wires are attached by downward pressure, ultrasonic energy and in some cases heat; ball bonding, gold or copper, makes its first bond in a ball shape with no preferred direction, so it is faster than wedge bonding; the most common thermosonic approach ball-bonds to the chip, then stitch-bonds to the substrate; copper wire from 10 to 75 µm oxidises and is worked in forming gas, 95% nitrogen and 5% hydrogen.
- Kulicke & Soffa, "Ball bonding" (technology page, read 3 November 2026). Ball bonding forms a microscopic spherical ball at the tip of an ultra-fine gold or copper wire; the backbone of modern semiconductor packaging.
- Kulicke & Soffa, RAPID Pro automatic wire bonder (brochure BB-032-07/2019, read 3 November 2026). The first of K&S's GEN-S series of ball bonders, succeeding the Power Series: real-time process and equipment health monitoring, traceability; 35 µm inline bond pad pitch; copper, silver or gold wire from 0.6 to 2.5 mil; total bond placement accuracy 2.0 µm at 3 sigma; wires up to 7.6 mm long with 1.0 mil wire; loops down to 40 µm high with 0.6 mil wire; cover gas for copper and silver wire, 1.1 L/min nominal; leadframes 90 to 300 mm long; 889 x 1009 mm.
- US 5,888,443 A (Texas Instruments), "Method for manufacturing prepackaged molding compound for component encapsulation" (1999). Transfer moulding in three stages, preheat, transfer and cure; the plunger forces the compound from the pot into the runners and the cavities; the compound an epoxy novolac resin with a filler; wire sweep as the compound enters the cavity through the gates, pulling at the fine wires; voids if the transfer is too slow.
- Besi, Fico AMS-i (product page, read 3 November 2026). A fully automatic moulding system for any pelletised moulding compound: pellets 14 or 14.3 mm across with a length check; presses of 90 tons clamping force; cavity temperature held within ±2 °C; leadframes up to 75 x 280 mm.
- Hanmi Semiconductor, micro SAW P2101 and Vision Placement 8.0PS (DKSH product page, read 3 November 2026). A package singulation saw for BGAs, QFNs and MAPs cut from strips: vision alignment to 2 µm, cutting accurate to ±50 µm, eight cutting channels, dual 10-inch chuck tables.