THE COURSE / M11 PACKAGE AND TEST / M11.4
Did it survive? Package test and reliability
After this lesson you can:
- Say what a test cell is, and why every package is tested again, hot and cold, and binned.
- Explain burn-in from the bathtub curve.
- Choose X-ray or acoustic microscopy for a suspected fault, and say why a package is baked and dry-packed.
Loading the lesson…
Sources
- Advantest, V93000 (product page, read 3 November 2026). A scalable test platform for SoCs, AI and high-performance computing, with RF, digital, power and analogue cards, every card type fitting every test head, from the CX to the LX class; EXA Scale its newest generation; Advantest says more than half the world's microchips are tested on its equipment.
- Advantest, M4871 pick-and-place handler (datasheet, 2016). A pick-and-place handler for SoC test cells: eight devices in parallel, up to 8,000 an hour, upgradable to 32; Tri-Temp active thermal control over a broad range, running at -10 °C for up to 14 days without defrosting; alignment for ball and pad pitches below 0.3 mm.
- Micron Technology (K. W. Marr), "Method, circuit and system for determining burn-in reliability from wafer level burn-in," US 6,943,575 B2 (filed 29 July 2002, granted 13 September 2005). The reliability curve's three regions: infant mortality, random failures and wearout; infant-mortality failures, though a small fraction of parts, are the largest contributor to early-life failure rates; burn-in stresses ICs with high temperature and raised supply voltage; conventional burn-in tests packaged parts.
- Aehr Test Systems, "Major hyperscaler expands AI processor production capacity with additional Aehr package-level test and burn-in systems" (25 August 2025). The ultra-high-power Sonoma family for AI accelerators, GPUs and HPC processors: production burn-in screening, qualification and reliability characterisation of packaged parts; from Aehr's acquisition of Incal Technology.
- Electronic Specifier, "Nuremberg debut for Quadra 7 flagship" (18 April 2017). Nordson DAGE's Quadra 7 X-ray inspection system, with 0.1 µm sub-micron feature recognition and an Aspire FP detector of 6.7 MP.
- Wikipedia, "Scanning acoustic microscope" (read 3 November 2026). Focused sound from a transducer, both it and the sample immersed in a coupling medium, typically water; echoes from each change in acoustic impedance, timed to give depth; at an interface with air the wave is totally reflected; a C-scan images one layer at a set depth; it finds voids, cracks and delaminations in microelectronic packages without opening them.
- Broadcom, "Handling Moisture-Sensitive Surface-Mount LEDs," Application Note 5305, AV02-1298EN (1 June 2020). Moisture diffuses into the package; at reflow, 210 to 260 °C, it vaporises and can crack the epoxy and delaminate the package: popcorning. IPC/JEDEC J-STD-020 levels and their floor life out of the bag at 30 °C/60% RH: MSL 1 unlimited, 2 one year, 2a four weeks, 3 168 hours, 4 72, 5 48, 5a 24, 6 bake before use; J-STD-033: dry before bagging, a moisture barrier bag with desiccant and a humidity indicator card; floor life paused below 5% RH and reset only by baking.