Skip to content

THE COURSE / M11 PACKAGE AND TEST / M11.6

Reveal the other side

After this lesson you can:

  • Say why the moulded chip-on-wafer is bonded face down to a glass carrier before its back is worked on.
  • Follow the interposer's back from grinding through the reveal to its C4 bumps.
  • Say how the carrier is released and the wafer cut into modules.

Loading the lesson…

Sources

  1. EV Group, EVG 850 TB temporary bonding system (product page, read 3 November 2026). A fully automated temporary bonding system doing the whole process in one tool, coating the adhesive, baking, aligning and bonding; carriers of silicon, glass, sapphire; up to 300 mm with oversized carriers; spin-coat thermoplastics, thermosets and tapes; options for high-topography and warped wafers.
  2. EV Group, "Temporary Bonding and Debonding" (brochure, read 1 November 2026). Temporary bonding gives mechanical support to thin or to-be-thinned wafers, for 3D ICs among others: the device wafer bonded to a carrier, thinned and processed on its back, then debonded onto a film frame; the 850 DB debonds thinned, bowed and warped wafers and cleans them; IR laser release lifts off the carrier, which has to be silicon.
  3. DISCO, DGP8761 (product page, read 25 October 2026). A fully automatic grinder/polisher for 300 mm wafers: three axes and four chuck tables, rough grinding, fine grinding, then dry polishing (or CMP, or ultra-fine grinding) for stress relief; stable thin grinding below 25 µm; the successor to the DGP8760.
  4. P. Garrou, "IFTLE 157 ECTC part 3: SPIL Backside Reveal, Sematech & IMEC Protrusion," Insights From Leading Edge, Solid State Technology, August 2013. Siliconware's ECTC 2013 paper: wafers temporarily bonded to carriers; the TSVs revealed by back grinding and plasma etch, passivated with PECVD nitride, and polished to open the copper; the reveal must keep thickness variation low for stacking, and its temperatures below the carrier adhesive's; controlling the exposed copper's height is a major challenge. SEMATECH's TSVs about 50 µm tall, aspect ratio about 10:1.
  5. US 11,901,334 B2 (Micron Technology), "Microelectronic devices including embedded bridge interconnect structures" (2024). A 2.5D package places several dies side by side on a TSV silicon interposer, attached by micro-bumps about 10 µm across; the interposer is attached to the package substrate by C4 bumps about 100 µm across.
  6. SUSS MicroTec, XBC300 Gen2 debonder and cleaner (product page, read 3 November 2026). Debonding and cleaning at room temperature, for device wafers down to 50 µm or below: controlled mechanical peel-off (DB300T) for glass and silicon carriers, or 308 nm excimer laser pulses that break the adhesive's bonds at the interface (LD300), for transparent carriers such as glass or sapphire; wet cleaning of adhesive and release-layer residues, the thinned wafer on tape (AR300TF); 200 and 300 mm.