Skip to content

THE COURSE / M11 PACKAGE AND TEST / M11.7

Hybrid bonding

After this lesson you can:

  • Say why bumps run out of room, and what hybrid bonding does instead.
  • Explain the bond: polished oxide meets oxide at room temperature, and an anneal joins the copper.
  • Say why the room is cleaner than anywhere else on the floor, and how the bond is checked.

Loading the lesson…

Sources

  1. US 11,901,334 B2 (Micron Technology), "Microelectronic devices including embedded bridge interconnect structures" (2024). A 2.5D package places several dies side by side on a TSV silicon interposer, attached by micro-bumps about 10 µm across; the interposer is attached to the package substrate by C4 bumps about 100 µm across.
  2. A. Alam et al. (AMD), "2nd Generation 3D V-Cache Enablement," IMAPS 20th Device Packaging Conference, March 2024. Hybrid bonding: oxide surfaces terminated in Si-OH bond at room temperature by weak hydrogen bonds; annealing forms siloxane bonds, Si-OH + OH-Si to Si-O-Si + H2O, and the copper diffuses; the copper slightly dished; die-to-wafer can use known-good dies of different sizes but is more complex and sensitive to particles; the second-generation 3D V-Cache stacks a 7 nm SRAM die face to back on a 5 nm compute die, a 9 µm minimum TSV and hybrid bond pitch.
  3. H. K. Cheemalamarri, T. V. N. Anh, C. G. Guan, M. K. Lim, S. R. Vempati, N. Singh (A*STAR IME), "Low Thermal Budget Fine-pitch Cu/Dielectric Hybrid Bonding with Cu Microstructure Modifications" (manuscript, A*STAR repository). Cu/dielectric hybrid bonding usually needs more than 350 °C overall; this work aims at 250 °C or less. Pads 3 µm at 6 and 10 µm pitch; copper dishing after CMP about 8 ± 3 nm, which must be held to a few nanometres when the copper can't expand much at low temperature, and dishing grows with pitch; dielectric roughness under 0.3 nm; nitrogen plasma and a deionised water rinse before bonding; annealed at 250 °C or less for 2 hours in nitrogen; the interface inspected by C-SAM.
  4. EV Group, "Hybrid and Fusion Bonding" (technology page, read 25 October 2026). Fusion, or direct, bonding joins dielectric layers on each wafer: activated surfaces pre-bond at room temperature through hydrogen bridge bonds, and an anneal turns them covalent. Hybrid bonding adds metal pads in the interface for face-to-face electrical connection, as in stacked image sensors, memory and 3D systems-on-chip.
  5. Besi, Datacon 8800 CHAMEO ultra plus AC (product page, read 1 November 2026). Besi's hybrid bonding platform: 100 nm alignment at 3 sigma; up to 2,000 cycles an hour (dry); hybrid bonding needs the highest cleanliness, an ISO 3 atmosphere in the working area; in-situ IR inspection of placement.
  6. Wikipedia, "Scanning acoustic microscope" (read 3 November 2026). Focused sound from a transducer, both it and the sample immersed in a coupling medium, typically water; echoes from each change in acoustic impedance, timed to give depth; at an interface with air the wave is totally reflected; a C-scan images one layer at a set depth; it finds voids, cracks and delaminations in microelectronic packages without opening them.