THE COURSE / M2 PURE SILICON / M2.6
Beyond silicon: SiC and GaN
After this lesson you can:
- Explain why power and radio chips use wide band gap materials, silicon carbide and gallium nitride.
- Follow a silicon carbide crystal from powder to an epi-ready wafer: grown from vapour over days or weeks, sliced by laser, ground and polished.
- Explain why gallium nitride is grown as a layer on silicon, silicon carbide or sapphire, and why it needs a buffer.
Loading the lesson…
Sources
- C. C. Hu, Modern Semiconductor Devices for Integrated Circuits (Pearson, 2010), chapter 1, "Electrons and Holes in Semiconductors" (free from the author). Each Si atom has four nearest neighbours (the diamond structure), lattice constant 5.43 Å; wafers cut on the (100) plane. About 1.1 eV frees a covalent electron, making a conduction electron and a hole; kT is 26 meV at room temperature. Energy levels split into bands: the valence band, the conduction band and the gap between; full and empty bands carry no current. Band gaps: InSb 0.18, Ge 0.67, Si 1.12, GaAs 1.42, GaP 2.25, ZnSe 2.7, diamond 6.0 eV; SiO₂ about 9 eV. A conductor has a partly filled band. hν (eV) = 1.24 ÷ λ (µm); visible light is 0.5–0.7 µm, so Si and GaAs absorb it and are opaque. Semiconductors differ from insulators in that they can be doped N or P type to low resistivity. Group V donors (As, P) give an electron and leave a positive ion; group III acceptors (B) take one and make a hole. Ionization energies about 50 meV (Sb 39, P 44, As 54, B 45, Al 57, In 160), so donors and acceptors are fully ionized at room temperature. np = ni²; ni about 10¹⁰ cm⁻³ for Si at room temperature, so np = 10²⁰ cm⁻⁶: with 10¹⁵ donors, p = 10⁵; with p = 10¹⁷, n = 10³. Majority and minority carriers.
- D. J. Lichtenwalner et al. (Wolfspeed, a Cree company), "Performance and Reliability of SiC Power MOSFETs," MRS Advances 1(2), 81–89 (2016). A wider band gap gives lower intrinsic carrier concentrations and higher critical fields before avalanche breakdown. 4H-SiC, the polytype favoured for power devices: band gap 3.26 eV. SiC forms many polytypes, and many years of development were needed for single-polytype, low-defect substrates. Micropipes cause high leakage and failure under high bias; basal-plane dislocations cause resistance drift; micropipe densities now below 0.5 cm⁻². 150 mm substrates available from various suppliers, 200 mm demonstrated. Cree's first commercial SiC MOSFET, 1200 V, in 2011; devices up to 15 kV demonstrated.
- Wolfspeed, Silicon carbide materials products (read 5 November 2026). Leading the industry's transition to 200 mm n-type wafers; n-type conductive SiC and SiC epitaxy. Single-crystal 4H, hexagonal; 100, 150 and 200 mm; band gap 3.26 eV; thermal conductivity about 4.2 W/cm·K (n-type, a-axis).
- PVA TePla, Physical Vapor Transport (read 5 November 2026). PVT grows high-purity, low-defect single crystals of compound semiconductors such as SiC and AlN, which cannot be produced by Czochralski, or only with great difficulty. The powder is sublimated in a closed crucible at over 2,000 °C; the vapour rises up the temperature gradient to a cooler seed and deposits layer by layer as a monocrystalline boule; several days to several weeks. Argon and nitrogen as process gases; a hydrogen variant prevents n-type doping by nitrogen, for transparent or semi-insulating crystals. SiC power devices: higher efficiency from reduced switching losses, more compact designs, operation at significantly higher temperatures; inverters and onboard chargers for electric vehicles, fast charging, renewable power converters, industrial drives and railway traction. Semi-insulating SiC in AR glasses.
- PVA TePla, SiCma (read 5 November 2026). PVT crystals up to 12"; frequency 6–10 kHz; footprint 1,200 × 2,500 mm, under 3,500 mm high with its signal lamp; about 1,850 kg; working pressure 1–900 mbar; working temperature up to 2,400 °C; 3C-, 4H- and 6H-SiC and AlN; options a coil lift, turbomolecular pump, hot zone rotation, upper and lower pyrometers, an H₂ line.
- DISCO, KABRA (read 5 November 2026). A laser continuously irradiates the ingot to form a separation layer at a set depth, and wafers are produced from it; for 4H, 6H, semi-insulating and multi-crystal SiC. Diamond wire saws are slow because of SiC's high hardness, and lose much material in the cut: about 3.1 hours a wafer from a 6-inch ingot (100 hours an ingot, 350 µm wafers from a 20 mm ingot), lapping to remove about 40 µm of undulation, and about 180 µm kerf loss a wafer. KABRA: about 10 minutes a wafer (about 31 hours an ingot, several ingots in parallel), no lapping, essentially no material loss (about 80 µm with the layer's removal), about 1.4 times as many wafers.
- DISCO, "Full-automatization of KABRA laser slicing technology: KABRA!zen developed" (press release, 11 December 2017, read 5 November 2026). Laser irradiation, wafer separation, fine grinding to the designated thickness and grinding of the ingot's top surface, all unmanned. A route to SiC epi-ready wafers: ingot coarse and fine grinding, laser irradiation, separation, edge trimming, wafer coarse and fine grinding, laser marking, polishing both sides, fine polishing of the Si face.
- Revasum, home page (read 5 November 2026). "It's no secret that SiC is a hard material to process." Grinding, polishing and CMP equipment for SiC; the 6EZ, a fully automated, single-wafer, dry-in-dry-out polisher, with the 7AF-HMG grinder; for SiC wafers 200 mm and below.
- N. Watanabe (NTT), "GaN-on-Si Technology for High-power Transistors," NTT Technical Review 12(4), 51–56 (April 2014). GaN transistors can't be made until nitride films are grown on a substrate by epitaxy. Nitride substrates are very expensive and small, so GaN is grown on large, cheap silicon. The lattice mismatch between a substrate and its film should generally be under 0.1%; GaN on Si is over 14%. GaN grows at about 1000 °C and shrinks more than Si on cooling, so the wafer turns concave and the layer can crack; a buffer layer compensates. NTT: HEMT structures over 4 µm thick on Si up to 6 inches, robust above 1000 V.
- AIXTRON, AIX G5+ C (read 5 November 2026). A Planetary reactor for GaN on 150 and 200 mm substrates (silicon, sapphire, SiC); 8 × 150 mm or 5 × 200 mm a run; fully automated, cassette to cassette, with in-situ Cl₂ cleaning.
- AIXTRON, Planetary principle (read 5 November 2026). MOCVD reactors for several substrates of 2 to 8 inches; horizontal laminar flow, with multiple rotation of the substrate carriers for even thickness, composition and doping; inductively heated.
- Wikipedia, Gallium nitride (read 5 November 2026). A wide band gap of 3.4 eV; very hard; deposited as thin films on sapphire or silicon carbide despite the lattice mismatch, or on silicon (GaN-on-Si, by MOCVD). MOVPE: ammonia with trimethylgallium or triethylgallium, in nitrogen or hydrogen, at 800 to 1100 °C. Microwave power amplifiers; 5G base stations; since the early 2020s, power supplies converting mains AC to low-voltage DC.