Skip to content

THE COURSE / M4 PATTERNING / M4.2

Resist and the track

After this lesson you can:

  • Follow a wafer through the track: prime, coat, bake, expose, bake again, develop.
  • Explain how a chemically amplified resist turns light into a pattern, and why its acid must not wander.
  • Say what a resist's contrast and an anti-reflective coating do for the edge of a line.

Loading the lesson…

Sources

  1. A. Doolittle, ECE 6450, lecture 7, "Lithography and Pattern Transfer," Georgia Tech. The sequence: dehydration bake, adhesion promoter (HMDS), spin-coated resist, soft bake, exposure, post-exposure bake, develop. Spin: dispense slowly, then spin faster for the thickness and uniformity. Projection reduces the mask 4 to 10 times, shrinking mask defects too. Wmin = k·λ/NA; depth of focus ∝ λ/NA², so a planar surface matters. Lines: 436 (g), 365 (i), KrF 248 and ArF 193 nm; F₂ 157 nm never widely adopted.
  2. M. Östling, IH2655, lecture 9, "Microlithography," KTH (Spring 2013). R = k1·λ/NA and DOF = k2·λ/NA²; higher-NA lenses decrease the depth of focus. Resist contrast γ = 1 / log10(Df/D0): about 2–3 for DNQ resists, 5–10 for DUV; chemical amplification steepens the transition. Standing waves on reflective layers, suppressed by an anti-reflective coating; post-exposure bake smooths them. Soft bake 90–100 °C; develop 30 s to minutes.
  3. T. Manouras and P. Argitis, "High Sensitivity Resists for EUV Lithography: A Review of Material Design Strategies and Performance Results," Nanomaterials 10, 1593 (2020), CC BY. In a chemically amplified resist, a photoacid generator makes acid on exposure; in the post-exposure bake the acid catalyses changes, classically the deprotection of the polymer, that make it soluble in aqueous base such as TMAH. Acid diffusion may limit resolution and worsen roughness; quenchers and bound acid generators limit it. Metal-oxide resists absorb EUV more strongly.