THE COURSE / M4 PATTERNING / M4.5
EUV
After this lesson you can:
- Explain how EUV light is made from tin, and why the whole path is in vacuum.
- Say how multilayer mirrors and a reflective mask carry the image, and what they cost in light.
- Compare what one EUV exposure prints with what one immersion exposure prints.
Loading the lesson…
Sources
- ASML, EUV lithography systems (read 26 October 2026). A CO2 laser fires two pulses at each falling tin drop, up to 50,000 times a second; EUV, 13.5 nm, is absorbed by everything, even air, so the path is in high vacuum; several multilayer mirrors instead of lenses shrink the reticle's pattern four times; reticles are multilayer reflectors that use interference. NXE systems, NA 0.33, print 13 nm; EXE, NA 0.55, 8 nm. The wafer stage positions the wafer to a quarter of a nanometre, checking 20,000 times a second. The 100th EUV system shipped at the start of 2020.
- ASML, "Light and lasers," lithography principles (read 26 October 2026). Mercury lamps at 436 and 365 nm; excimer lasers, in which two gases that don't normally combine form excited temporary molecules that release light: krypton fluoride at 248 nm and argon fluoride at 193 nm, which enabled 38 nm features; EUV at 13.5 nm from tin droplets hit by laser pulses 50,000 times a second.
- ASML, "Lenses and mirrors," lithography principles (read 26 October 2026). The highest-resolution DUV machines reach an NA of 1.35 by projecting through a layer of water between the lens and the wafer; without water, an NA above 1 was impossible. EUV is absorbed by most materials, so EUV systems use mirrors of over 100 layers, polished to less than an atom's thickness, the largest a metre across; High NA raised EUV's NA from 0.33 to 0.55.
- D. Attwood, "Overview of EUV Lithography," EE 213 lecture 7, University of California, Berkeley (Spring 2009). 4:1 reduction, step and scan, with aspheric multilayer-coated optics; Mo/Si multilayers of 6.7 nm period, about 70% reflective; tin emits strongly near 13.5 nm; the reflective mask: a Mo/Si multilayer on a low-thermal-expansion substrate under an absorber pattern of about 70 nm, its blank defects on the substrate or within the stack; source power set by throughput models and the resist's dose.
- N. Farrar, D. Brandt and N. Böwering (Cymer), "Optics for scanning: Multilayer mirrors enable next-generation EUV lithography," Laser Focus World (26 February 2009). Mo/Si multilayers reflect at most about 70% per mirror at near-normal incidence; a six-mirror projection lens transmits about 12%, and the whole optical train, illuminator and reflective mask included, less than 1%, so the source must be powerful; mirrors polished to under 0.2 nm roughness.
- ASML, Our history (read 26 October 2026). Founded in 1984 by Philips and ASMI as ASM Lithography, launching the PAS 2000 stepper; in Veldhoven from 1985, with 100 employees; independent and listed in 1995; TWINSCAN dual-stage in 2001; the first immersion machine, the AT:1150i, in 2003, and in volume production from 2006; the first EUV prototype in 2010; EUV in high-volume manufacturing from 2020; the first High NA system shipped in 2023.