Skip to content

THE COURSE / M4 PATTERNING / M4.6

Few photons, and High-NA

After this lesson you can:

  • Count the photons a dose delivers, and explain why EUV's are so few.
  • Say what stochastic failures are, why they're rare and hard to find, and what dose trades against them.
  • Explain what High-NA EUV gains, and what its half-size fields and thinner focus give up.

Loading the lesson…

Sources

  1. M. Hassaan, U. Saleem, A. Singh, A. J. Haque and K. Wang, "Recent Advances in Positive Photoresists: Mechanisms and Fabrication," Materials 17, 2552 (2024), CC BY. EUV light at 13.5 nm against DUV's 193 nm: each photon carries 14.3 times the energy, so there are fewer of them, and photon shot noise roughens lines under 10 nm. Wet resists are spin-coated.
  2. J. Church, L. Meli, J. Guo et al. (IBM, Fractilia), "Fundamental characterization of stochastic variation for improved single-expose extreme ultraviolet patterning at aggressive pitch," J. Micro/Nanolith. MEMS MOEMS 19, 034001 (2020), open access. Fluctuations in photon shot noise, absorption and the chemical reactions that follow cause stochastic failures, such as resist line bridges and breaks, often at rates below one in a million; finding one in a million vias by CD-SEM would take a day per condition, so defect inspection is needed. Centering the process window on defect data raised a 30 nm pitch layer's electrical yield from 50% to 100%.
  3. ASML, "5 things you should know about High NA EUV lithography" (25 January 2024). NA from 0.33 (NXE) to 0.55 (EXE): 8 nm against 13 nm, transistors 1.7 times smaller, 2.9 times the density; anamorphic optics demagnify 4× one way and 8× the other, so fields are half the size; wafer and reticle stages accelerate at 8 g and 32 g; more than 185 wafers an hour; the first modules shipped to Intel in December 2023.
  4. ASML, EUV lithography systems (read 26 October 2026). A CO2 laser fires two pulses at each falling tin drop, up to 50,000 times a second; EUV, 13.5 nm, is absorbed by everything, even air, so the path is in high vacuum; several multilayer mirrors instead of lenses shrink the reticle's pattern four times; reticles are multilayer reflectors that use interference. NXE systems, NA 0.33, print 13 nm; EXE, NA 0.55, 8 nm. The wafer stage positions the wafer to a quarter of a nanometre, checking 20,000 times a second. The 100th EUV system shipped at the start of 2020.
  5. D. Attwood, "Overview of EUV Lithography," EE 213 lecture 7, University of California, Berkeley (Spring 2009). 4:1 reduction, step and scan, with aspheric multilayer-coated optics; Mo/Si multilayers of 6.7 nm period, about 70% reflective; tin emits strongly near 13.5 nm; the reflective mask: a Mo/Si multilayer on a low-thermal-expansion substrate under an absorber pattern of about 70 nm, its blank defects on the substrate or within the stack; source power set by throughput models and the resist's dose.
  6. T. Manouras and P. Argitis, "High Sensitivity Resists for EUV Lithography: A Review of Material Design Strategies and Performance Results," Nanomaterials 10, 1593 (2020), CC BY. In a chemically amplified resist, a photoacid generator makes acid on exposure; in the post-exposure bake the acid catalyses changes, classically the deprotection of the polymer, that make it soluble in aqueous base such as TMAH. Acid diffusion may limit resolution and worsen roughness; quenchers and bound acid generators limit it. Metal-oxide resists absorb EUV more strongly.