Skip to content

THE COURSE / M5 DEPOSITION / M5.4

Atomic layer deposition

After this lesson you can:

  • Predict a film's thickness from its cycles.
  • Explain why ALD coats a deep trench evenly.
  • Say where chips need it, and what it costs.

Loading the lesson…

Sources

  1. A. W. Ott, J. W. Klaus, J. M. Johnson and S. M. George, "Al₂O₃ thin film growth on Si(100) using binary reaction sequence chemistry," Thin Solid Films 292, 135–144 (1997). Growth of 1.1 Å per cycle on Si(100); the rate falls above 450 K.
  2. R. L. Puurunen, "Surface chemistry of atomic layer deposition: a case study for the trimethylaluminum/water process," J. Appl. Phys. 97, 121301 (2005). Why growth is less than a monolayer a cycle.
  3. S. M. George, "Atomic layer deposition: an overview," Chem. Rev. 110, 111–131 (2010). The cycle, the ALD window, conformality.
  4. K. Mistry et al., "A 45nm logic technology with high-k+metal gate transistors…," IEDM 2007. High-k metal gate in high-volume manufacturing.
  5. H. B. Profijt, S. E. Potts, M. C. M. van de Sanden and W. M. M. Kessels, "Plasma-assisted atomic layer deposition: basics, opportunities, and challenges," J. Vac. Sci. Technol. A 29, 050801 (2011). Lower temperatures and more materials; reduced conformality.