Skip to content

THE COURSE / M5 DEPOSITION / M5.5

PVD

After this lesson you can:

  • Explain how sputtering knocks atoms off a target and lands them on the wafer.
  • Explain why a trench's floor gets less film than its top corners, and how ionized PVD helps.
  • Say what the barrier and the seed under copper wiring are for.

Loading the lesson…

Sources

  1. J. D. Plummer, M. D. Deal and P. B. Griffin, Silicon VLSI Technology: Fundamentals, Practice and Modeling (Prentice Hall, 2000). The textbook account of thin-film deposition and the back end.
  2. S. M. Rossnagel and J. Hopwood, "Metal ion deposition from ionized magnetron sputtering discharge," J. Vac. Sci. Technol. B 12, 449–453 (1994). Ionizing sputtered metal and steering it onto the wafer; up to about 85% ionized at 30 mtorr.
  3. Applied Materials, Endura CuBS IMS with Volta ruthenium CVD (product page). The Fab B tool's barrier, liner and seed configuration.