Skip to content

THE COURSE / M6 ETCH, CLEAN AND CMP / M6.2

Plasma etch

After this lesson you can:

  • Explain why ions and radicals together etch straight down.
  • Say which chemistry etches silicon and which etches oxide, and why the product must be a gas.
  • Explain why a deep, narrow hole etches slower, and how the etch knows when to stop.

Loading the lesson…

Sources

  1. V. M. Donnelly and A. Kornblit, "Plasma etching: Yesterday, today, and tomorrow," J. Vac. Sci. Technol. A 31, 050825 (2013). The review M6's etch lessons rest on: the history, ion-assisted etching, the chemistry for silicon and oxide, sidewall protection, the contact etch, aspect-ratio-dependent etching and the endpoint.
  2. J. W. Coburn and H. F. Winters, "Ion- and electron-assisted gas-surface chemistry—An important effect in plasma etching," J. Appl. Phys. 50, 3189–3196 (1979). Silicon etched slowly by XeF₂ gas alone or by argon ions alone, and far faster by both together.
  3. J. D. Plummer, M. D. Deal and P. B. Griffin, Silicon VLSI Technology: Fundamentals, Practice and Modeling (Prentice Hall, 2000). The textbook account of thin-film deposition and the back end.