THE COURSE / M6 ETCH, CLEAN AND CMP / M6.4
Atomic layer and selective etch
After this lesson you can:
- Explain atomic layer etching as two self-limiting steps, the counterpart of ALD.
- Say what the ion-energy window is, and what happens either side of it.
- Explain why releasing nanosheets needs an etch that goes sideways and takes only one material.
Loading the lesson…
Sources
- K. J. Kanarik, T. Lill, E. A. Hudson, S. Sriraman, S. Tan, J. Marks, V. Vahedi and R. A. Gottscho, "Overview of atomic layer etching in the semiconductor industry," J. Vac. Sci. Technol. A 33, 020802 (2015). Atomic layer etching: two self-limiting steps, modification then removal; silicon by chlorine and 50 eV argon ions, about 0.7 nm a cycle; the ion-energy window; no loading; the first reports from 1988.
- X. Sun et al., "A Novel Si Nanosheet Channel Release Process for the Fabrication of Gate-All-Around Transistors and Its Mechanism Investigation," Nanomaterials 13, 504 (2023). Releasing stacked silicon nanosheets by removing the silicon-germanium between them: wet, plasma and remote-plasma etching compared; a multi-step remote-plasma process reaching 168:1 for Si₀.₇Ge₀.₃ over silicon.