THE COURSE / M6 ETCH, CLEAN AND CMP / M6.5
Strip and clean
After this lesson you can:
- Explain how a downstream plasma strips resist without damaging the devices.
- Choose between the cleans for organics, metals and native oxide, and put them in order.
- Say why drying is part of the clean, and what can go wrong.
Loading the lesson…
Sources
- V. M. Donnelly and A. Kornblit, "Plasma etching: Yesterday, today, and tomorrow," J. Vac. Sci. Technol. A 31, 050825 (2013). The review M6's etch lessons rest on: the history, ion-assisted etching, the chemistry for silicon and oxide, sidewall protection, the contact etch, aspect-ratio-dependent etching and the endpoint.
- W. Kern and D. A. Puotinen, "Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology," RCA Review 31, 187–206 (1970). The RCA clean: water, peroxide and ammonia (5-1-1 to 7-2-1) for organics and some metals, then water, peroxide and hydrochloric acid (6-1-1 to 8-2-1) for heavy metals, each 10 to 20 minutes at 75 to 85 °C; safe for silicon and oxide while peroxide remains.
- W. Kern, "This Week's Citation Classic" on Kern and Puotinen (1970), Current Contents, 1983. Kern's own account: begun at RCA in 1961, named SC-1 and SC-2, a brief dilute-HF etch for the native oxide added after the first step, and megasonic peroxide cleaning for particles.
- X. Sun et al., "A Novel Si Nanosheet Channel Release Process for the Fabrication of Gate-All-Around Transistors and Its Mechanism Investigation," Nanomaterials 13, 504 (2023). Releasing stacked silicon nanosheets by removing the silicon-germanium between them: wet, plasma and remote-plasma etching compared; a multi-step remote-plasma process reaching 168:1 for Si₀.₇Ge₀.₃ over silicon.
- J. D. Plummer, M. D. Deal and P. B. Griffin, Silicon VLSI Technology: Fundamentals, Practice and Modeling (Prentice Hall, 2000). The textbook account of thin-film deposition and the back end.