Skip to content

THE COURSE / M6 ETCH, CLEAN AND CMP / M6.6

CMP

After this lesson you can:

  • Explain how chemistry and a pad together flatten a wafer, high spots first.
  • Use Preston's relation to say how pressure and speed change the removal rate.
  • Predict where over-polishing dishes copper and erodes the insulator, and why the endpoint matters.

Loading the lesson…

Sources

  1. X. Wu and Q. Yao, "Toward Intelligent Chemical Mechanical Polishing: Integrating Multiscale Modeling and Machine Learning," Materials 19, 4205 (2026). How CMP works: a carrier, a rotating pad and slurry; chemistry softens the surface, the pad and abrasives shear it off, high spots under more pressure go faster; Preston's relation, removal rate = k·P·V, with k drifting as the pad and slurry change.
  2. J. T. Pan, P. Li, K. Wijekoon, S. Tsai, F. Redeker, T. Park, T. Tugbawa and D. Boning, "Copper CMP and Process Control," CMP-MIC 1999. Copper CMP in three steps on three platens with optical endpoints; dishing and erosion defined, beginning at the barrier, dishing growing with line width and erosion with pattern density.
  3. H. Li, X. Lu and J. Luo, "Motor Power Signal Analysis for End-Point Detection of Chemical Mechanical Planarization," Micromachines 8, 177 (2017). Copper CMP's endpoint: all the extra metal and barrier gone without over-polishing the lines; optical, friction, temperature and eddy-current methods; the platen motor's power changes as the pad meets the dielectric.
  4. V. M. Donnelly and A. Kornblit, "Plasma etching: Yesterday, today, and tomorrow," J. Vac. Sci. Technol. A 31, 050825 (2013). The review M6's etch lessons rest on: the history, ion-assisted etching, the chemistry for silicon and oxide, sidewall protection, the contact etch, aspect-ratio-dependent etching and the endpoint.