Skip to content

THE COURSE / M6 ETCH, CLEAN AND CMP / M6.7

Choosing

After this lesson you can:

  • Ask the four questions that choose a removal step.
  • Choose the method for each of the module's jobs, and defend it.

Loading the lesson…

Sources

  1. V. M. Donnelly and A. Kornblit, "Plasma etching: Yesterday, today, and tomorrow," J. Vac. Sci. Technol. A 31, 050825 (2013). The review M6's etch lessons rest on: the history, ion-assisted etching, the chemistry for silicon and oxide, sidewall protection, the contact etch, aspect-ratio-dependent etching and the endpoint.
  2. X. Sun et al., "A Novel Si Nanosheet Channel Release Process for the Fabrication of Gate-All-Around Transistors and Its Mechanism Investigation," Nanomaterials 13, 504 (2023). Releasing stacked silicon nanosheets by removing the silicon-germanium between them: wet, plasma and remote-plasma etching compared; a multi-step remote-plasma process reaching 168:1 for Si₀.₇Ge₀.₃ over silicon.
  3. W. Kern and D. A. Puotinen, "Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology," RCA Review 31, 187–206 (1970). The RCA clean: water, peroxide and ammonia (5-1-1 to 7-2-1) for organics and some metals, then water, peroxide and hydrochloric acid (6-1-1 to 8-2-1) for heavy metals, each 10 to 20 minutes at 75 to 85 °C; safe for silicon and oxide while peroxide remains.
  4. J. T. Pan, P. Li, K. Wijekoon, S. Tsai, F. Redeker, T. Park, T. Tugbawa and D. Boning, "Copper CMP and Process Control," CMP-MIC 1999. Copper CMP in three steps on three platens with optical endpoints; dishing and erosion defined, beginning at the barrier, dishing growing with line width and erosion with pattern density.