THE COURSE / M7 DOPING AND HEAT / M7.1
Doping and heat
After this lesson you can:
- Name a transistor's doped regions, and say what each one sets.
- Say why ion implantation replaced diffusion from the surface, and why every implant is followed by heat.
- Work out how far an anneal moves a dopant, from √(Dt).
Loading the lesson…
Sources
- J. D. Plummer, M. D. Deal and P. B. Griffin, "Diffusion," EE212 class handout for chapter 7 of Silicon VLSI Technology (Stanford, 1999). Where a transistor's doped regions go; predeposition and drive-in against implantation and annealing; Fick's laws, the Gaussian spreading as √(Dt), diffusivities rising exponentially with temperature (boron: D₀ = 1.0 cm²/s, Eₐ = 3.5 eV); successive anneals add their Dt.
- J. D. Plummer, M. D. Deal and P. B. Griffin, "Ion Implantation," EE212 class handout for chapter 8 of Silicon VLSI Technology (Stanford, 1999). Doses of 10¹¹ to 10¹⁶ per cm², counted by the integrated beam current; the beamline; a Gaussian with range Rp and straggle ΔRp, peak = dose ÷ (√(2π)·ΔRp); mask thickness; channeling, eased by a 7° tilt; damage, amorphization, regrowth; transient enhanced diffusion.
- L. Rubin and J. Poate, "Ion Implantation in Silicon Technology," The Industrial Physicist 9(3), 12–15 (American Institute of Physics, 2003). Implantation displaced diffusion for being more precise, reliable and repeatable; dose and energy are set on the tool; up to 35 implants in a CMOS chip; three classes of implanter, high current, medium current and high energy, with their beam currents, energies and uses; tilts up to 60°. Both authors worked at Axcelis.
- W. Shockley, "Forming semiconductive devices by ionic bombardment," US Patent 2,787,564 (filed 28 October 1954, granted 2 April 1957). Ions of an impurity fired into a semiconductor to form a thin layer; its thickness controlled by the ions' energy; then heat, about 400 °C, to repair the damage.