Skip to content

THE COURSE / M7 DOPING AND HEAT / M7.3

Deep wells

After this lesson you can:

  • Say why a well is implanted deep and retrograde rather than diffused from the surface.
  • Explain how a linear accelerator reaches MeV energies, and what a multiply charged ion gains.
  • Work out how thick a mask must be to stop an implant.

Loading the lesson…

Sources

  1. J. D. Plummer, M. D. Deal and P. B. Griffin, "Diffusion," EE212 class handout for chapter 7 of Silicon VLSI Technology (Stanford, 1999). Where a transistor's doped regions go; predeposition and drive-in against implantation and annealing; Fick's laws, the Gaussian spreading as √(Dt), diffusivities rising exponentially with temperature (boron: D₀ = 1.0 cm²/s, Eₐ = 3.5 eV); successive anneals add their Dt.
  2. J. D. Plummer, M. D. Deal and P. B. Griffin, "Ion Implantation," EE212 class handout for chapter 8 of Silicon VLSI Technology (Stanford, 1999). Doses of 10¹¹ to 10¹⁶ per cm², counted by the integrated beam current; the beamline; a Gaussian with range Rp and straggle ΔRp, peak = dose ÷ (√(2π)·ΔRp); mask thickness; channeling, eased by a 7° tilt; damage, amorphization, regrowth; transient enhanced diffusion.
  3. L. Rubin and J. Poate, "Ion Implantation in Silicon Technology," The Industrial Physicist 9(3), 12–15 (American Institute of Physics, 2003). Implantation displaced diffusion for being more precise, reliable and repeatable; dose and energy are set on the tool; up to 35 implants in a CMOS chip; three classes of implanter, high current, medium current and high energy, with their beam currents, energies and uses; tilts up to 60°. Both authors worked at Axcelis.
  4. S. Aronowitz, L. Khan and J. Kimball, "Method of forming retrograde well structures and punch-through barriers using low energy implants," US Patent 5,963,801 (LSI Logic; filed 19 December 1996, granted 5 October 1999). Its background: a retrograde well has a deep peak below the surface and falls towards it; unlike a conventional well, implanted and diffused, it puts the dopant at depth without further diffusion; latch-up lets large currents flow between transistors and can stop a CMOS chip working; heavy doping at the well bottom shunts the carriers and prevents it; deep implants of 1.5 MeV; high-energy implanters are very expensive.