Skip to content

THE COURSE / M8 INTEGRATION / M8.3

The temporary gate and the inner spacers

After this lesson you can:

  • Say what the temporary gate and its outer spacers are for.
  • Put the inner spacer steps in order: recess, indent, fill, etch back.
  • Explain why inner spacers matter, and why their indent must be so even.

Loading the lesson…

Sources

  1. Q. Zhang, Y. Zhang, Y. Luo and H. Yin, "New structure transistors for advanced technology node CMOS ICs," National Science Review 11, nwae008 (2024). Stacked nanosheet transistors: about 80% of the flow shared with a gate-last FinFET, plus four new steps (sub-fin doping, Si/SiGe superlattice epitaxy, inner spacers, channel release); the superlattice grown below 650 °C; inner spacers of more than ten steps; SiGe removed at over 100:1; the sub-fin's leakage and bottom dielectric isolation; wider sheets for more current; the gate between the sheets. FinFETs used from the 22 nm node to 3 nm; fins grown thinner and taller bring reduced mobility, random doping fluctuation and Vt differences, and around 3 nm short-channel effects. GAA nanosheets: better electrostatics than FinFETs, more effective width from stacked sheets, and a broad allowable width for flexible design; Samsung's stacked three-sheet GAAFETs with 12 nm gates; an imec 2016 nanowire with a 24 nm gate reached 65 mV/decade and DIBL of 42 mV/V. Channel doping much reduced in FinFETs and GAAFETs. CFET stacks the n- and p-type transistors vertically, removing the n-to-p spacing, toward cells of four or even three tracks.
  2. M. Wang, X. Guo, Z. Huang, M. Liao, T. Liu et al., "Feature Comparison and Process Optimization of Multiple Dry Etching Techniques Applied in Inner Spacer Cavity Formation of GAA NSFET," Nanomaterials 16, 145 (2026). The inner spacer module: the SiGe recessed a precise distance and the cavity filled with dielectric; it needs very high SiGe-to-Si selectivity, a near-rectangular cavity (a crescent risks collapse and spread), and uniform depth, because the inner spacer's thickness helps set the gate length; plasma, remote-plasma and gas etching compared, gas etching most selective (about 56, layer-to-layer variation 0.65 nm).