THE COURSE / M8 INTEGRATION / M8.4
Source, drain, and the gate at last
After this lesson you can:
- Explain why the source and drain are grown back by epitaxy, doped as they grow.
- Follow the replacement gate: fill, polish, temporary gate out, channels released, high-k and metal in.
- Explain what limits the gate between the sheets, and how earlier heat makes the release harder.
Loading the lesson…
Sources
- Q. Zhang, Y. Zhang, Y. Luo and H. Yin, "New structure transistors for advanced technology node CMOS ICs," National Science Review 11, nwae008 (2024). Stacked nanosheet transistors: about 80% of the flow shared with a gate-last FinFET, plus four new steps (sub-fin doping, Si/SiGe superlattice epitaxy, inner spacers, channel release); the superlattice grown below 650 °C; inner spacers of more than ten steps; SiGe removed at over 100:1; the sub-fin's leakage and bottom dielectric isolation; wider sheets for more current; the gate between the sheets. FinFETs used from the 22 nm node to 3 nm; fins grown thinner and taller bring reduced mobility, random doping fluctuation and Vt differences, and around 3 nm short-channel effects. GAA nanosheets: better electrostatics than FinFETs, more effective width from stacked sheets, and a broad allowable width for flexible design; Samsung's stacked three-sheet GAAFETs with 12 nm gates; an imec 2016 nanowire with a 24 nm gate reached 65 mV/decade and DIBL of 42 mV/V. Channel doping much reduced in FinFETs and GAAFETs. CFET stacks the n- and p-type transistors vertically, removing the n-to-p spacing, toward cells of four or even three tracks.
- M. Wang, X. Guo, Z. Huang, M. Liao, T. Liu et al., "Influence of Device Structure and Manufacturing Thermal Budget on Channel Release Module in GAA NSFET and Process Optimization," Nanomaterials 16, 716 (2026). Channel release by non-plasma gas etching at a SiGe/Si selectivity of up to 87, silicon damage under 1 nm at over 100% overetch; wide and narrow sheets released together; annealing at 500 and 700 °C diffuses germanium, thickening the SiGe from 14.25 to 15.31 nm and slowing its etch; the gate stack's total thickness is fixed by the SiGe grown at the start; several threshold voltages per device type.