Skip to content

THE COURSE / M8 INTEGRATION / M8.5

Contacts and the first wiring

After this lesson you can:

  • Follow current from the first wiring level down through a contact into a transistor's source.
  • Explain how a contact can land partly over the gate without shorting to it, and what a silicide is for.
  • Say why copper struggles in the narrowest lines, and what is replacing it there.

Loading the lesson…

Sources

  1. H. H. Radamson, Y. Miao, Z. Zhou, Z. Wu, Z. Kong, J. Gao et al., "CMOS Scaling for the 5 nm Node and Beyond: Device, Process and Technology," Nanomaterials 14, 837 (2024). Contacts: silicides lower the contact resistance (nickel-platinum, and titanium silicide for its low resistivity and thermal stability, helped by a germanium pre-amorphizing implant), but consume silicon and can relax a strained source and drain; the SiGe:B source/drain contact resistance is the key to nanosheet performance beyond 5 nm. Wiring: copper struggles as barriers fail to shrink; cobalt and ruthenium, ruthenium and tungsten via prefills cutting via resistance by 35 and 40%, subtractive ruthenium lines down to 10.5 nm.
  2. Q. Zhang, Y. Zhang, Y. Luo and H. Yin, "New structure transistors for advanced technology node CMOS ICs," National Science Review 11, nwae008 (2024). Stacked nanosheet transistors: about 80% of the flow shared with a gate-last FinFET, plus four new steps (sub-fin doping, Si/SiGe superlattice epitaxy, inner spacers, channel release); the superlattice grown below 650 °C; inner spacers of more than ten steps; SiGe removed at over 100:1; the sub-fin's leakage and bottom dielectric isolation; wider sheets for more current; the gate between the sheets. FinFETs used from the 22 nm node to 3 nm; fins grown thinner and taller bring reduced mobility, random doping fluctuation and Vt differences, and around 3 nm short-channel effects. GAA nanosheets: better electrostatics than FinFETs, more effective width from stacked sheets, and a broad allowable width for flexible design; Samsung's stacked three-sheet GAAFETs with 12 nm gates; an imec 2016 nanowire with a 24 nm gate reached 65 mV/decade and DIBL of 42 mV/V. Channel doping much reduced in FinFETs and GAAFETs. CFET stacks the n- and p-type transistors vertically, removing the n-to-p spacing, toward cells of four or even three tracks.