Skip to content

THE COURSE / M8 INTEGRATION / M8.7

Thin to the transistors, and power from below

After this lesson you can:

  • Put the thinning stages in order, and say why it ends on an etch stop.
  • Explain how nano-through-silicon vias and backside rails bring power up to the transistors.
  • Weigh front-side against backside power for a chip, and defend the choice.

Loading the lesson…

Sources

  1. imec, "Imec demonstrates critical building blocks for a backside power delivery network" (10 June 2021). Power delivered from the back: a Si/SiGe stack grown first, its SiGe an etch stop; the front built; the wafer flipped and bonded face down to a carrier; the back thinned to the SiGe, which is removed; tungsten nano-TSVs and backside metal; final silicon 20 to 370 nm thick; it largely reduces the IR drop from rising wiring resistance.
  2. DISCO, DGP8761 (product page, read 25 October 2026). A fully automatic grinder/polisher for 300 mm wafers: three axes and four chuck tables, rough grinding, fine grinding, then dry polishing (or CMP, or ultra-fine grinding) for stress relief; stable thin grinding below 25 µm; the successor to the DGP8760.
  3. DISCO, "What kind of company is DISCO?" (read 25 October 2026). Precision cutting, grinding and polishing equipment and diamond tools; thinning to the 5 µm level, holding a 30 cm wafer's thickness variation within 1.5 µm; named DISCO from 1969, for exports, and DISCO CORPORATION from 1977, having begun as Dai-Ichi Seitosho, a maker of blades and grinding wheels.
  4. TSMC, "A16 Technology" (logic technology page, read 25 October 2026). A16 integrates nanosheet transistors with a backside power rail.