Skip to content

THE COURSE / M9 MEASURE AND YIELD / M9.3

Critical dimensions

After this lesson you can:

  • Explain how a CD-SEM forms an image, and why a line's edges are what it measures.
  • Say why resist is measured with low-energy electrons, and how the beam can bias a width.
  • Tell when to measure a line by CD-SEM and when by optical scatterometry.

Loading the lesson…

Sources

  1. N. G. Orji, M. Badaroglu, B. M. Barnes, C. Beitia, B. D. Bunday, U. Celano, R. J. Kline, M. Neisser, Y. Obeng and A. E. Vladár, "Metrology for the next generation of semiconductor devices," Nature Electronics 1, 532–547 (2018), author manuscript. For some products more than half the manufacturing steps can involve measurement; CD-SEM, scatterometry and image-based or scatterometry overlay, CD-SAXS, TEM (destructive), AFM; hybrid metrology; precision and stability matter more than absolute accuracy for most fab uses, traceability when instruments are compared; methods divergence, such as 2.7 nm between CD-AFM and EUV scatterometry; under 5 nm, a deviation under 10% can affect device performance.
  2. Z. Hu, R. Zhao, X. Wang, P. Tao, Q. Wang, Y. Wang, H. Xu and X. He, "Canny Algorithm Enabling Precise Offline Line Edge Roughness Acquisition in High-Resolution Lithography," ACS Omega 8, 3992–3997 (2023). Secondary electron yield rises as the beam meets the surface more obliquely, so a line's edges show brighter than its top or the background; the edge is generally taken at the largest brightness gradient; LER/LWR, the edge's deviation from the ideal, measured from many edge points, generally by CD-SEM.