Skip to content

THE COURSE / M9 MEASURE AND YIELD / M9.4

Overlay

After this lesson you can:

  • Say what overlay error is, and why it's measured apart from the width.
  • Explain how image-based and diffraction-based overlay read their targets.
  • Follow measured errors to a correction for the scanner, and say why targets and devices can disagree.

Loading the lesson…

Sources

  1. Y. Lan, J. Qi and M. Gui, "One Method for Improving Overlay Accuracy Through Focus Control," Micromachines 17, 207 (2026). Overlay is one of lithography's three core performance indicators, with resolution and throughput; with single-digit-nanometre CDs, overlay under 2 nm (3σ); image-based overlay finds the centroids of marks in both layers, the box-in-box most used in mass production; diffraction-based overlay often more precise but needs gratings and suffers from asymmetry.
  2. S. Liu, Y. Tang, X. Cheng, Y. Long, J. Jiang, Y. He and L. Zhao, "Using Higher Diffraction Orders to Improve the Accuracy and Robustness of Overlay Measurements," Micromachines 16, 347 (2025). Overlay error generally kept below 20–30% of the CD; in diffraction-based overlay the ±1st-order intensity difference is zero with no overlay error, and with built-in offsets ±D, OV = D·(I₊D + I₋D)/(I₊D − I₋D); CMP can leave the bottom grating asymmetric, adding error.
  3. S. V. Sreenivasan, "Nanoimprint lithography steppers for volume fabrication of leading-edge semiconductor integrated circuits," Microsystems & Nanoengineering 3, 17075 (2017). Overlay errors split into rigid body (x, y, θ), scale (magnification in x and y), shape (orthogonality, trapezoid) and higher orders; systematic errors that repeat in each field or wafer to wafer can be found offline with dense overlay marks and corrected ahead.
  4. N. G. Orji, M. Badaroglu, B. M. Barnes, C. Beitia, B. D. Bunday, U. Celano, R. J. Kline, M. Neisser, Y. Obeng and A. E. Vladár, "Metrology for the next generation of semiconductor devices," Nature Electronics 1, 532–547 (2018), author manuscript. For some products more than half the manufacturing steps can involve measurement; CD-SEM, scatterometry and image-based or scatterometry overlay, CD-SAXS, TEM (destructive), AFM; hybrid metrology; precision and stability matter more than absolute accuracy for most fab uses, traceability when instruments are compared; methods divergence, such as 2.7 nm between CD-AFM and EUV scatterometry; under 5 nm, a deviation under 10% can affect device performance.