THE COURSE / M9 MEASURE AND YIELD / M9.5
Finding defects
After this lesson you can:
- Explain how an optical inspector finds defects by comparing dies.
- Say why it can detect a defect far smaller than its light but not show what it is.
- Weigh sensitivity against nuisance in setting an inspection, and read a defect map.
Loading the lesson…
Sources
- W. Kong, W. Zhang, L. Qin and D. Gong, "PWDD-Net: A Patterned Wafer Defect Detection Network for Semiconductor Manufacturing," Nanomaterials 16, 1026 (2026). Patterned-wafer inspection compares each die with a defect-free reference (die-to-reference) or with adjacent dies (die-to-die); the comparison is sensitive to sub-pixel registration errors and illumination changes.
- R. Zhang, X. Guo, Y. Xu, T. Zhang and M. Ming, "BWD-DETR: A Robust Framework for Bright-Field Wafer Defect Detection," Sensors 26, 1064 (2026). Optical microscopes image large areas fast; bright-field resolution is limited by diffraction, so small defects can't be imaged clearly and their signals are easily masked by noise; detection compares die to die, cell to cell or die to database.
- KLA, "Chip Manufacturing 101" (2021, read 25 October 2026). Defect sizes are often smaller than 10 nanometres; more than a thousand process steps for every chip; process control as inspection, metrology and data analysis.
- U. Amato, A. Antoniadis, I. De Feis et al., "Detecting Important Features and Predicting Yield from Defects Detected by SEM in Semiconductor Production," Sensors 25, 4218 (2025). STMicroelectronics production data: on average 2.3–2.4 of 30–35 layers inspected per wafer; in one product 4.7% of dice failed electrical test overall, 6.8% of those with a generic defect and 16.3% of those with an SEM-classified defect (9.1%, 13.2% and 19.0% in another); SEM with AI software estimates each defect's type.
- MIT OpenCourseWare, 2.830J/6.780J/ESD.63J Control of Manufacturing Processes, lecture 10, "Yield Modeling" (Spring 2008), after May and Spanos, CC BY-NC-SA. Poisson: Y = e^(−A₀D₀) for random, uncorrelated point defects that each cause a fault; negative binomial: Y = (1 + A₀D₀/α)^(−α), α the clustering parameter, Poisson as α grows large, typically 1.5 to 2 for memory and microprocessors; clustered defects land several to a die; critical area, and the defects that matter most near the minimum feature size.