Skip to content

THE COURSE / M9 MEASURE AND YIELD / M9.6

From defects to yield

After this lesson you can:

  • Say what defect review adds to inspection, and why not every defect kills a die.
  • Turn a defect density and a die area into a yield, with and without clustering.
  • Explain why big dies suffer most, and what splitting them into chiplets trades.

Loading the lesson…

Sources

  1. MIT OpenCourseWare, 2.830J/6.780J/ESD.63J Control of Manufacturing Processes, lecture 10, "Yield Modeling" (Spring 2008), after May and Spanos, CC BY-NC-SA. Poisson: Y = e^(−A₀D₀) for random, uncorrelated point defects that each cause a fault; negative binomial: Y = (1 + A₀D₀/α)^(−α), α the clustering parameter, Poisson as α grows large, typically 1.5 to 2 for memory and microprocessors; clustered defects land several to a die; critical area, and the defects that matter most near the minimum feature size.
  2. Y. Han, H. Xu, M. Lu, H. Wang, J. Huang, Y. Wang, Y. Wang, F. Min, Q. Liu, M. Liu and N. Sun, "The Big Chip: Challenge, model and architecture," Fundamental Research 4, 1431–1441 (2024). The largest single die, 858 mm² (26 × 33 mm), set by the reticle and optics; the Poisson model tends to underestimate large chips' yield; the negative binomial model is widely used; a multi-chiplet system's yield set by its chiplets' yields and the bonding yield, which falls as chiplets are added.
  3. U. Amato, A. Antoniadis, I. De Feis et al., "Detecting Important Features and Predicting Yield from Defects Detected by SEM in Semiconductor Production," Sensors 25, 4218 (2025). STMicroelectronics production data: on average 2.3–2.4 of 30–35 layers inspected per wafer; in one product 4.7% of dice failed electrical test overall, 6.8% of those with a generic defect and 16.3% of those with an SEM-classified defect (9.1%, 13.2% and 19.0% in another); SEM with AI software estimates each defect's type.