Skip to content

THE COURSE / M9 MEASURE AND YIELD / M9.7

Control charts and the parametric test

After this lesson you can:

  • Say what the test structures between the chips measure, and why they're there.
  • Read a control chart and its rules, and tell a real shift from chance.
  • Compute Cp and Cpk, and say what each one reveals.

Loading the lesson…

Sources

  1. NIST/SEMATECH e-Handbook of Statistical Methods, chapter 6, "Process or Product Monitoring and Control" (read 25 October 2026). SPC compares what is happening today with what happened previously, against control limits from the process's history; 3σ limits, outside which a normal process falls 0.27% of the time; inspecting every product is costly and inefficient.
  2. M. F. Niekiel, J. M. Meyer, H. Lewitz, A. Kittmann, M. A. Nowak, F. Lofink, D. Meyners and J.-H. Zollondz, "What MEMS Research and Development Can Learn from a Production Environment," Sensors 23, 5549 (2023). Test structures, process control monitors, are designed to be sensitive to their target parameter and as insensitive as possible to other fluctuations, and probed electrically on automated wafer probers; run-to-run control by SPC and APC in volume production.
  3. MIT OpenCourseWare, 2.830J/6.780J/ESD.63J Control of Manufacturing Processes, lecture 10, "Yield Modeling" (Spring 2008), after May and Spanos, CC BY-NC-SA. Poisson: Y = e^(−A₀D₀) for random, uncorrelated point defects that each cause a fault; negative binomial: Y = (1 + A₀D₀/α)^(−α), α the clustering parameter, Poisson as α grows large, typically 1.5 to 2 for memory and microprocessors; clustered defects land several to a die; critical area, and the defects that matter most near the minimum feature size.